|
Billing Statements:
Shown below is an example of a typical City of
La Porte utility bill. 
The La
Porte Water Department sends out meter readers each month to take
the readings that you see on the bill located in the "present
reading" column. The difference between this months reading
and last months reading is shown in the "consumption"
column. This reading is based on thousands of gallons with a
billing minimum of 3, so a reading of 6 in the consumption column means
that 6 thousand gallons of water went through the meter in the previous
month. If you use less than 3 thousand gallons in a month, you
will still be billed based on 3 thousand gallons.
The values listed in the "Amount" column on the right
for sewage is calculated by multiplying the current utility rate by the
amount listed under consumption and adding a flat administrative fee to
arrive at the total.
To give an example:
Current Rate is $4.30 / 1000 gallons of water
Administrative fee is $3.31
Consumption Current
Rate
Administrative Fee Total
5
x $4.30
= $21.50 + $3.31
= $24.81
During the summer many customers use City water to water the
grass. This results in a higher consumption reading, but this
water does not go into the sewer. In order to reflect this
difference in water usage from the reading in the month of May to the
reading in the month of September the Utility Billing Department
uses the average of the preceding winter months to calculate the summer
usage. If you only used 5 thousand gallons a month during the
winter months, then during this summer discounting period your usage
jumps to 9 thousand gallons a month the Sewage portion of your bill will
be based on the 5 thousand gallon a month usage.
Utility Bills may be paid by mail or by stopping by the billing
office located at
City of La Porte Utilities
801 Michigan Avenue
La Porte, IN 46350
If you have any questions regarding your bill, please call the
Utility Billing Office at: 362-3175.
|